Minor Cannabinoids Wholesale: CBG, CBN, CBC & THCV

CBD opened the market, but the most interesting product development now is happening with minor cannabinoids. CBG, CBN, CBC and THCV are present in hemp in much smaller amounts than CBD. That makes them more expensive to produce, harder to source consistently and more dependent on a supplier who documents every lot. This hub is a B2B guide to buying minor cannabinoids wholesale: the available formats, how to specify them and how to build them into finished products.

Why minor cannabinoids are different to source

Most hemp is bred and grown for CBD, so the other cannabinoids appear only in small percentages. Producing a kilogram of a minor cannabinoid takes far more input material, specialized cultivars or extra conversion and refining steps. For buyers, that has three practical effects:

  • Supply is tighter. Availability can change between lots, so plan purchases ahead of production.
  • Documentation matters more. A lot-specific COA is the only way to confirm you received what you paid for.
  • Format options vary. Some minor cannabinoids crystallize into isolates readily, while others are more practical as distillates.

CBG (cannabigerol)

CBG is often called the “parent” cannabinoid because other cannabinoids form from its acid precursor in the plant. It crystallizes well, so it is widely available as an isolate.

Formulation notes: CBG isolate behaves much like CBD isolate. It dissolves in warm carrier oils and has a neutral flavor. It is a common partner to CBD in blended tinctures and gummies.

CBN (cannabinol)

CBN forms naturally as other cannabinoids age and oxidize, and commercial CBN is produced by controlled conversion and refining. It is available as a crystalline isolate.

  • Bulk CBN isolate: crystalline cannabinol at 95–99% purity, sold online in 1 kg lots with a lot-specific COA.

Formulation notes: CBN is often used in small amounts alongside other cannabinoids. Weigh accurately, because small per-serving amounts make weighing errors proportionally larger. Pre-dissolving the isolate in a measured volume of carrier oil makes small doses easier to distribute evenly.

CBC (cannabichromene)

CBC is one of the less common cannabinoids and is usually supplied as a distillate, a concentrated oil, rather than as a crystal.

Formulation notes: like other distillates, CBC is viscous. Warm it gently to pour and weigh, and add it through the oil phase of your formula.

THCV (tetrahydrocannabivarin)

THCV is a varin cannabinoid with a shorter side chain than the more familiar cannabinoids. It occurs only in small amounts in most hemp, which makes it one of the scarcer minor cannabinoids. Brands developing gummies and drinks have shown growing interest in it.

Formulation notes: because supply is limited, confirm availability before you finalize a launch date, and reserve material for your first production runs.

Building multi-cannabinoid blends

Pairing cannabinoids is one of the most common reasons brands buy minor cannabinoids. Isolates make blending precise because each input is a single, known cannabinoid. To design a blend:

  1. Set your target per serving for each cannabinoid, for example 20 mg CBD + 5 mg CBG.
  2. Calculate each input with the potency from its lot COA: grams = (mg per serving × servings) ÷ (potency × 1,000).
  3. Choose the delivery phase. Isolates and distillates go into oil, and water-soluble powders go into water or dry blends.
  4. Verify the finished product. Test finished batches to confirm the actual milligrams per serving match the label.

Our isolate vs distillate vs water-soluble guide explains how each format behaves in production.

Specifying minor cannabinoids: a checklist

  • Format (isolate, distillate or water-soluble) and target potency
  • A lot-specific COA with the full cannabinoid profile and contaminant panels (see how to read a COA)
  • Pack size and packaging (sealed, light-protected, clearly labeled)
  • Lead time and availability for repeat orders
  • Storage guidance: cool, dark and sealed

From raw material to finished product

If you would rather launch a finished product than formulate in-house, our Gummy Builder lets you design a custom cannabinoid gummy and order 250 finished bottles or a 1,000-gummy R&D run. For capsules, tablets and other supplements, our sister company Palmyra Nutra offers custom manufacturing. Browse all raw materials in the shop, or check any lot on our COA lookup.

Specifying minor cannabinoids on a purchase order

Minor cannabinoids are lower-volume and higher-value than CBD, so a precise specification protects you. A clear purchase specification should state:

  • Cannabinoid and format: for example CBG isolate, CBC distillate or THCV water-soluble powder.
  • Minimum potency: the lowest acceptable percentage of the target cannabinoid, measured on the lot COA.
  • Required test panels: potency plus residual solvents, heavy metals, pesticides and microbials.
  • Quantity and packaging: net weight per container and number of containers.
  • Documentation: lot-specific COA supplied with the shipment.

Agreeing on these points before you place the order avoids disputes later and makes incoming inspection fast.

Format guide for each cannabinoid

CBG

Available as a crystalline isolate for oil-based products and as a water-soluble powder for beverages and drink mixes. Isolate is the most flexible starting point for blending with CBD isolate.

CBN

Supplied as an isolate, which handles like CBD isolate: weigh it as a powder and dissolve it in your carrier oil.

CBC

Supplied as a distillate in 1 and 2 kg sizes and as a water-soluble powder. Warm the distillate before weighing, as you would any distillate.

THCV

Supplied as a distillate by inquiry and as a water-soluble powder. Because supply is limited, confirm availability before you set a launch date.

Managing supply for minor cannabinoid products

Minor cannabinoid supply can be tighter than CBD, and lead times can vary. To protect a product launch:

  1. Lock in the raw material before printing packaging or committing to retail dates.
  2. Keep at least one production run of safety stock for core SKUs.
  3. Share your forecast with your supplier so they can plan for your volume.
  4. Qualify each new lot with a bench batch before full production, especially for blends.

Worked blend example

Say you want a tincture with 20 mg CBD and 10 mg CBG per serving, 1,000 servings. You need 20,000 mg (20 g) CBD and 10,000 mg (10 g) CBG. At 99% CBD isolate purity, that is 20 ÷ 0.99 ≈ 20.2 g. At a 97% CBG isolate lot, it is 10 ÷ 0.97 ≈ 10.3 g. Always use the potency on the specific lot’s COA, add a validated manufacturing overage and test the finished batch.

If you are new to minor cannabinoids, start with one well-documented ingredient, such as CBG isolate alongside CBD, prove the process at bench scale, and add further cannabinoids once your supply, specifications and quality checks are running smoothly.

Frequently asked questions

Which minor cannabinoids are available in bulk?

We supply CBG and CBN isolates, CBC and THCV distillates, and water-soluble PhytoNano powders for CBG, CBC and THCV.

Why do minor cannabinoids cost more than CBD?

They occur in hemp in much smaller amounts, so producing a kilogram takes more input material and extra refining steps.

Is CBG available as an isolate?

Yes. Bulk CBG isolate is crystalline cannabigerol at 95-99%+ purity, sold by the kilogram with a lot-specific COA.

How do I build a multi-cannabinoid blend?

Set a target per serving for each cannabinoid, calculate each input from its lot COA potency, choose oil or water phase, and test the finished batch.

Is THCV always in stock?

THCV supply is limited, so THCV distillate is sold by inquiry. Confirm availability before setting a launch date.

← All raw material buyer guides